DIATOOL 3 Inch/75MM Vacuum Brazed Diamond Grinding Wheel Half-Round Edge Edge Profile for Stone Abrasive Grinding disc Vacuum brazed Profile Hand Diamond Wheel Grit 60 （Diamond Height 20mm）

Product Information

HIGH-QUALITY MATERIAL: Made of high manganese steel and brazed diamond, it's designed for long life. In particular, the thermal load often defines the process limits in flute grinding and can thus be associated with the strong increase in wear in the area of a high depth of cut [ 16]. A purely experimental approach can iteratively lower the wear in these areas by increasing the grain concentration, as shown in the results of the ungraded grinding wheels, too. Apart from this, it also shows that a reduction of the wear difference is possible by adjusting the area-related number of grains to the local related material removal rate according to formula 4. Grain concentration and grain size directly influence the occurring wear during deep grinding. The results show that there is a maximum (percolation threshold) in grain concentration due to structural bonding failure.

PRO-EDGER diamond grinding wheels | RUBI UK

Denkena, B., Bergmann, B. & Raffalt, D. Operational behaviour of graded diamond grinding wheels for end mill cutter machining. In these segments, the load on the grinding tool is highest and the relative difference of the concentration is most pronounced. Therefore, the influence of this effect is reduced with decreasing l g and Q' w. Since no repeat measurements are possible due to the time-consuming experimental effort, a scattering of the measurement results cannot be excluded. It can be stated that for a smoother transition smaller concentration steps must be applied. Considering this, the hybrid graded wheels #2 and #3 (Table 2) were designed. In these, a step in the grain concentration also occurs between segments 1 and 2, but this is countered by the adjustment of the grain size. Lu YJ, Li LJ, Xie J, et al (2017) Dry electrical discharge dressing and truing of diamond grinding wheel V-tip for micro-grinding. In: 2017 5th International conference on mechatronics, materials, chemistry and computer engineering (ICMMCCE 2017). Atlantis Press, pp 548–552 Zhao QL, Guo B (2011) Ultraprecision grinding technology of microstructured optical functional molds. J Mech Eng 47:177–185 Denkena B, Grove T, Göttsching T, Dzierzawa P, Kempf F (2017) Methods of analysis for a deeper understanding of the grinding process. In: Proceedings of the 20th international symposium on advances in abrasive technology: 945–951

Mayr J, Barbist R (2014) Untersuchung und Bewertung der Schleifbarkeit von Hartmetall. Der Stahlformenbauer 31(4):74–79

Grinding of Superhard Materials with Diamond Wheels Grinding of Superhard Materials with Diamond Wheels

Wang Y, Zhou X, Hu D (2006) An experimental investigation of dry-electrical discharge assisted truing and dressing of metal bonded diamond wheel. Int J Mach Tools Manuf 46:333–342 Our diamond grinding wheels are developed specifically for your Tormek water-cooled sharpening system. The low rpm of our machines makes them ideal for use with diamond grinding wheels as no heat is generated.

Lian Y, Mu C, Xie C, Yao B (2019) Experimental investigation of inductively coupled plasma etching on cemented carbides. Vacuum 162:101–109 Xxx DH, Xu Z (2019) Dressing methods of superabrasive grinding wheels: A review. J Manuf Process 45:46–69