Smartseal Concrete Sealer - Professional Grade Concrete Sealer Outdoor Use As A Driveway Sealer, Patio Sealer - Ideal Concrete Sealant Solvent Based Acrylic Concrete Sealer (150 ml Sample)

Product Information

Newer water-based sealers are less harsh and contain lower amounts of VOCs. Many are also environmentally friendly and qualify for LEED points. They form a thin, protective film that provides good protection from moisture and chloride penetration while still allowing water vapor to escape from the slab. Available in different sheen levels, acrylic concrete sealers can be used to enhance colored, exposed, or stamped concrete in either interior or exterior concrete surfaces. Outdoors, an acrylic sealer will be ultraviolet (UV) resistant and will not turn yellow. There are several variables to consider when choosing the right concrete sealer for a project. As a general rule, sealing concrete driveways should be done with penetrating sealers, indoor floors with acrylic sealers, and concrete countertops with either an epoxy sealer or a polyurethane sealer. Note the differences among these types described in detail in this article. Q. Is it better to roll or spray concrete sealer?

Exterior concrete surfaces subject to corrosion and freeze-thaw damage. Where a natural, matte finish is desired. Penetrating sealers include silanes, siloxanes, silicates and siliconates that penetrate into the concrete to form a chemical barrier. Penetrating sealers have a long lifespan and are a great choice for exterior applications. They don’t peel, delaminate or wear away. This type of sealer is sometimes referred to as an impregnating concrete sealer.Outdoors a penetrating concrete sealer is usually better than a film-forming product for safety reasons, but also because the end result will last longer and looks more realistic and natural, especially when sealing stamped concrete. WHAT'S THE BEST SEALER FOR CONCRETE COUNTERTOPS?

Specially formulated all acrylic solvent-free formula manufactured from high-quality acrylic resins here in the UK. If you’re planning a concrete-sealing project, you may still have a few questions about buying and using these products. Keep reading for the answers to several frequently asked questions about choosing and applying concrete sealer. Q. Which concrete sealer should I use? This sealer won’t change the look of the concrete, and it’s also designed to protect from mold and mildew growth (we didn’t have an opportunity to test for that, however). We only applied a single coat for testing purposes, but the manufacturer recommends two coats for the best protection. Sealing concrete is a fast process that can be completed in a single day. If the sealer you’re using requires two coats, you may have to wait a specified amount of time before applying the second coat. However, some sealers can be applied wet-on-wet, which means there is no downtime. A sealer coat, which is often referred to as a wash coat, is typically used on unstained wood or on top of stain. The objective is to ‘seal’ the wood’s pores. This results in an even and smooth surface, which makes it perfect for the topcoats of lacquer or varnish. The sealer coat is also going to stop the stain from bleeding into the finished material and any successive coats. Of course, the sealer is not only available for wood. There are sealers available for many other surfaces too, including concrete sealer. All of these products have the purpose of creating a smooth and even surface. Choosing The Perfect Outdoor Concrete SealerBrowse our range of EN1504-2 Approved concrete sealer s and concrete sealant. Our concrete sealer is for the protection and repair of concrete structures ( Hydrophobic Impregnation). For all our sealer range full relevant technical data is available. Smartseal's concrete sealers are widely used as a concrete floor sealer for use in domestic and commercial environments. Sealing is the last, but most important, step when installing concrete countertops in a kitchen or bathroom. A waterproof concrete countertop sealer will prevent food stains as well as scratches.

The product dried blotchy, but we continued testing and, at the end, when we power-washed, the sealer peeled off in flakes. We don’t know exactly what the problem was—whether the product had expired or perhaps had been exposed to extreme temperatures at some time during the storage/shipment process that caused it to break down. Our experience might have been a fluke, so we don’t want to give the wrong impression of the overall quality of the sealer, but judging by the product we received, we cannot recommend it. This particular sealer can also be used over water-based paint on several surfaces and may be mixed with decorative chips, mica flakes, or nonskid powders for improved traction. It’s made with bio-polyurethane that provides excellent surface resistance to water, UV rays, chemicals, scratches, and heat. Concrete sealers perform differently depending on the type of surface. A penetrating sealer is usually the best choice for high-traffic exterior concrete surfaces like driveways, sidewalks, and patios. In cold climates, silane or silane/siloxane blends are used because they hold up best against the abrasive effects of scraping and plowing. In warm climates, either silane/siloxane blend or acrylic will work well. Acrylic is best for decorative, high-gloss, and color-enhancing applications.Foundation Armor AR350 solvent-based acrylic concrete sealer met and exceeded our expectations, earning the best overall spot. We were sealing a small 1-foot-by-1-foot concrete paver, so we used a brush to apply AR350 evenly to the surface. It went on smoothly and self-leveled within seconds to form a uniform coating. In 24 hours, it was completely dry, yet it retained a hint of sheen, giving it an attractive finish that gave depth and richness without changing the color of the concrete. Most concrete sealers can be sprayed on with either a garden-style pump sprayer or a high-pressure, low-volume (HPLV) sprayer. They can also be applied with a lint-free paint-and-stain roller. Epoxy, which requires thoroughly mixing resin and hardener before application, is spread with a notched squeegee and finished smooth with a lint-free roller. The Advantages of Using Concrete Sealer Use the ratio of 4 parts of water to 1 part of PVA to correctly dilute the sealer. You can use a more diluted mixture but this is the standard ratio we would advise. 5. Apply the PVA sealer to the concrete floor Tip: Choose a penetrating sealer if you prefer a natural finish that will not change the look of your concrete. HOW MUCH SEALER DO I NEED? Foundation Armor AR350 is a breathable, nonyellowing, solvent-based acrylic. It darkens concrete and pavers to give them a wet look with a durable, low-gloss finish that brightens dull or faded surfaces. It can be applied to either unsealed concrete surfaces or those previously sealed with a solvent-based acrylic sealer.