Cricut Mug Press, Starter Bundle

Product Information

No, you can cut the sheets you already have down to size and they will work just fine! Just remember to mirror your image!! Any item not in its original condition, is damaged or missing parts for reasons not due to our error For use with Infusible Ink compatible mugs, 11 - 16 oz (350 - 470 ml) straight wall only; 82 - 86 mm diameter mugs +/- 1 mm (3.2 - 3.4 in) To get the design on straight and centered. position the mug with the handle pointing at you, just like this.

When the update is done, you're ready to go! From this point on, you can use the mug press without connecting it to your computer, so remove the USB cable and keep it safe in case Cricut asks you to do a firmware update again. Don’t put the mug in upside down — the zone heating system will help heat the bottom of the mug so you get consistent transfers (a feature missing in other mug presses) and you’ll lose that perk if you put it in upside down. No, you have to use only heat-resistant tape. If you use regular tape, it will melt adhesive onto your design and mug press, so don’t do that.

You need to wait 15-30 minutes to let the mug cool down after coming out of the Cricut Mug Press before touching and removing the liner. The handle will stay cool to the touch, but the cup itself will be hot, so don’t touch. Tip: Use can use any digital cutter to cut the infusible ink sheets. Or cut with a die-cutter or even by hand.

Please note: The Cricut Mug Press won’t work until it has been connected to a desktop or laptop via USB and linked to your Cricut account. And that's it! Your design is wrapped around your mug and it's time to press it! You do NOT need to cover your design with butcher paper if you're just using Infusible Ink transfer sheets! STEP 6: PRESS THE MUG WITH THE CRICUT MUG PRESS

Note: If for any reason it doesn't cut all the way through the outside as mine does, you can either trim it later with scissors or next time you cut increase your pressure in your Custom Material Settings. (I have my Infusible Ink Transfer Sheet material settings on 268 pressure and it works like a champ.) STEP 4: WEED YOUR INFUSIBLE INK DESIGN